| Home |
| Search |
| Today's Posts |
|
|
|
#1
November 15th 05, 07:02 PM
|
|||
|
|||
Handling 450 line...??
"Bill" wrote in message . .. Laying out at 16 element "Sterba" into Europe... Getting the 450 line into the shack!! 1.- Should I float the 450 line into some 2 inch PVC through the wall then mid-air it 5 feet to the tuner....?? 2.- Or should I mount the 4:1 balun on the outside then bring co-ax through the wall ...then 5 feet top the tuner.... 3.-..Or...?? TNX, Bill My 600 ohm open line comes in through a horizontally sliding basement window. I simply use fiberglass insulation on either side of the line and bring it in with the one conductor above the other. Then I use the sliding window to put compression on the insulation. Ed, N5EI |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| SWR - wtf? | CB | |||
| SWR - wtf? | Antenna | |||
| How to measure soil constants at HF | Antenna | |||
| swr question | Antenna | |||
| FCC: Broadband Power Line Systems | Policy | |||
Hybrid Mode
