Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
Ed wrote:
Thanks, Irv. Possibly workable for me, but the threaded end needs good RF continuity to the 1/2" tube end, which will be soldered to a helical winding running up the fiberglass rod. Connect the helical winding to a 3/8" automotive lug and slip it over the 3/8" threaded section. -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
On Topic | Shortwave | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Scanner | |||
Outdoor Antenna and lack of intermod | Scanner | |||
Outdoor Scanner antenna and eventually a reference to SW reception | Shortwave |