| Home |
| Search |
| Today's Posts |
|
|
|
#1
December 15th 05, 05:28 AM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Looking for fiberglass antenna part
Connect the helical winding to a 3/8" automotive lug and slip it over the 3/8" threaded section. That will work, Cecil. Especially is I run a nut up on it to tighten on the lug. Thanks. Ed PS: Am still looking for the one that antenna manufacturers use, though. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| On Topic | Shortwave | |||
| FS: sma-to-bnc custom fit rubber covered antenna adapter | Scanner | |||
| Outdoor Antenna and lack of intermod | Scanner | |||
| Outdoor Scanner antenna and eventually a reference to SW reception | Shortwave | |||
Hybrid Mode
