you are great cecil, you cut out the original post to make it look like i
had nothing to do with the original statement... if you will remember he was
asking if he would get 25 ohms if he connected the braids together without
the center conductors... i simply say that if you connect both the braid and
center conductors you get a 25 ohm line... the implication being that if you
don't connect the center conductors you don't get a 25 ohm line.

thanks for keeping the fight thread going so well, now that you are riled up
i guess you can branch out into some other threads and bog them down for the
rest of the week.

"Cecil Moore" wrote in message
. com...
Dave wrote:
better get out the snorkle... if you tie the braid and the center
conductor together you get a 25 ohm line, i use that all the time for my
stack matching boxes.

Nobody said anything about tying the braid and center conductor
together. If the side by side run of 50 ohm coax is used as a
parallel feedline, the braids are tied together and the Z0
is 100 ohms when the center conductors are connected across
the load.
--
73, Cecil http://www.qsl.net/w5dxp