Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
Don wrote:
Thanks for the response. Will I run the risk the damaging other components if I try an audio transformer with a 10,000 ohm primary and an 8 ohm secondary? Hi Don... My tube manual lists the load impedance as 7600 ohms for a 6K6 with 250 volts on the plate. The 10k transformer will not provide full output from the tube but should be substantially more than the original transformer. No risk of damage to anything but your ears if you plug headphones in with the volume turned up! 73, Roger -- Remove tilde (~) to reply Remember the USS Liberty (AGTR-5) http://ussliberty.org/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Grundig Satellit800 | Shortwave | |||
Modulation Inductor? | Homebrew | |||
The Shortwave Antenna used determines the type of Matching Transformer | Shortwave | |||
Hallicrafter S-40B Power Transformer Question | Boatanchors | |||
FA Acrosound TO-330 Ultra-Linear audio transformer | Boatanchors |