| Home |
| Search |
| Today's Posts |
|
#2
February 28th 07, 01:33 AM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
ARC5
Rewire the filaments from 24 volt configuration to 12 volts.
You need +250 for plate voltage. It's been 50+ years since I modified one, so I don't know the pin assignments. /s/ DD genev wrote: I just got an ARC 5 receiver and wonder if anyone has any tips on modifying it; I had one in the 1960's, but can't remember what I had to do to it. I think I replaced the dynamoter plug with a modern one, but dont remember how I put the tuning knob on the front. Also, what voltages are needed? Thanks in advance for any info. Richard K1TAV |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wanted: some ARC5 transmitter parts | Boatanchors | |||
| Wanted: some ARC5 transmitter parts | Equipment | |||
| Wanted: some ARC5 transmitter parts | Swap | |||
| ARC5 Transmitter problem | Boatanchors | |||
| Schematic Needed for ARC5 rcvr | Boatanchors | |||
Threaded Mode
