On Sun, 29 Jan 2012 14:48:54 -0800, Cadiscase wrote:

If I wanted to buy a NEW 3.2 ohm speaker to use with a Hammarlund radio
is there one that anyone would recommended for listening to AM
broadcasts? Is there any recommended size speaker such as 6 inch or 8
inch, etc? Is there any loss in audio quality using a 4 ohm speaker? How
would two 8 ohm speaker in parallel work?

I suspect that a 4-ohm speaker, or two 8-ohm speakers in parallel, will
sound just fine.

Is anyone using a DSP unit with their boatanchor which they would
recommend? Most [All ?] DSP units distort the audio so there is probably
always some distortion, but some DSP units would be better than others.
I am thinking in term of AM signals broadcast band reception.

I have followed the price of the Hammarlund speakers on ebay and they
are a bit expensive. I assume they would be best, but a bit rich for me.

I don't know what you want the DSP unit to do, or what you're calling
"distortion", but just about any post-audio filtering unit is going to
work by "distorting" the signal -- the question isn't "does it distort?",
but "does it improve other things enough to make the distortion
worthwhile?".

Beyond that -- I dunno, I really got on to answer your speaker question.

--
My liberal friends think I'm a conservative kook.
My conservative friends think I'm a liberal kook.
Why am I not happy that they have found common ground?

Tim Wescott, Communications, Control, Circuits & Software
http://www.wescottdesign.com

On Jan 30, 12:53*pm, Tim Wescott wrote:
On Sun, 29 Jan 2012 14:48:54 -0800, Cadiscase wrote:
If I wanted to buy a NEW 3.2 ohm speaker to use with a Hammarlund radio
is there one that anyone would recommended for listening to AM
broadcasts? Is there any recommended size speaker such as 6 inch or 8
inch, etc? Is there any loss in audio quality using a 4 ohm speaker? How
would two 8 ohm speaker in parallel work?

I suspect that a 4-ohm speaker, or two 8-ohm speakers in parallel, will
sound just fine.

Is anyone using a DSP unit with their boatanchor which they would
recommend? Most [All ?] DSP units distort the audio so there is probably
always some distortion, but some DSP units would be better than others.
I am thinking in term of AM signals broadcast band reception.

I have followed the price of the Hammarlund speakers on ebay and they
are a bit expensive. I assume they would be best, but a bit rich for me..

I don't know what you want the DSP unit to do, or what you're calling
"distortion", but just about any post-audio filtering unit is going to
work by "distorting" the signal -- the question isn't "does it distort?",
but "does it improve other things enough to make the distortion
worthwhile?".

Beyond that -- I dunno, I really got on to answer your speaker question.

--
My liberal friends think I'm a conservative kook.
My conservative friends think I'm a liberal kook.
Why am I not happy that they have found common ground?

Tim Wescott, Communications, Control, Circuits & Softwarehttp://www.wescottdesign.com

The noise I [most] want to eliminate is the HISS when you receive a
weaker signal.
The hetrodyne can also be a problem, but the slot can do some good,.
I got the Hammarlund because I wanted the full quality sound on AM.
I will have to except some distortion when I use a DSP unit.
The CLRSpkr DSP is a reasonable unit to use I think.
I would like to eliminate or decrease the fading effect by a better
AVC.
Well I cant have everything with a Hammarlund.Thanks to ALL for their
responses.
PS:: Is there a Service Bulletin to the HQ-145X ?

Cadiscase wrote:

The noise I [most] want to eliminate is the HISS when you receive a
weaker signal.

There isn't a lot out there to do that. There is stuff in the professional
audio world for doing that, but it's either based on a desktop computer or
it's expensive.

Most of these work by breaking the signal up into multiple frequency bands
and gating them individually.

The hetrodyne can also be a problem, but the slot can do some good,.

Slot?

I got the Hammarlund because I wanted the full quality sound on AM.
I will have to except some distortion when I use a DSP unit.
The CLRSpkr DSP is a reasonable unit to use I think.

It's more designed for weak signal SSB work, but try it. In general, I
find most of the gating systems sold for communications to be really
unpleasant for long-term listening.

I would like to eliminate or decrease the fading effect by a better
AVC.

I think the problem is the ionosphere, not the AVC. You can make the AVC
respond faster if you want, but then flutter becomes even more annoying.
Anything that rides the signal is going to cause changes in the noise floor
as it does so.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."