It's a 9-pin plug you seek, not an 8-pin. They're mighty hard to find. Here
is a link to a surplus store that may carry them. I've found a few oddball
parts here over the years:

http://www.montagar.com/~patj/nortex.htm

73 and good luck!
Dean K5DH


In article ,
says...

Urgently need the 8 prong plug that goes in the back of a Johnson Ranger
II. If
you have one of these, PLEASE email me at and I wil
l
happily buy it from you. Last item needed in restoration. Thank you!

"=K=5=D=H=" wrote in message
...
It's a 9-pin plug you seek, not an 8-pin. They're mighty hard to find.
Here
is a link to a surplus store that may carry them. I've found a few
oddball
parts here over the years:

http://www.montagar.com/~patj/nortex.htm

73 and good luck!
Dean K5DH

No, its an 8-pin. The 86 series has an alignment keyway in the center
(which is not energized - and does not count as a pin). Readily available,
being mfg. everyday in Salem, NJ.
Here is WPI catalog (look at Section 4 for diagrams and options for 86
series plugs and sockets)
http://www.wpi-interconnect.com/Cata...alog%20PDF.pdf