Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() |
#2
![]() |
|||
|
|||
![]()
Jerry McCarty wrote:
On 24-Dec-2005, (Scott Dorsey) wrote: "C'est un Nagra. C'est suisse, et tres, tres precis." So how is the 650HR repair coming along Scott? Slowly. The problem is that video is going into a proprietary chip on the aperture board, and not coming out. I put the thing on the shelf for a while; I should really try touching up all the solder joints. It does seem to be that stage rather than any of the RLC filter stages. I _do_ have an "official spares kit" for the 650... but the aperture chip is specific to the 650HR. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: Ceramic / Crystal / Mechanical filters | Swap | |||
FA: Kenwood Crystal Filters & Misc | Swap | |||
AOR AR8600MkII - SSB and AM Collins Filters | Scanner | |||
WTT: MOTOROLA MINITOR II PERMACODE ACTIVE FILTERS NLN7834 | Swap | |||
Why Put Ebay Crap Here???????????????? | Swap |