Home |
Search |
Today's Posts |
#1
|
|||
|
|||
EQ Setting for Voice Recording
Does anybody have a nice baseline EQ setting for voice work ??
Recording in Protools and using the Digirack EQ Thanks Scott |
#2
|
|||
|
|||
Start with 2dB lift at 10kHz and 3.5kHz, and take about 2dB out at
400Hz. With a reasonable microphone, this is a very good starting point. Depending on room or aircon rumble you might want to use a high pass filter set at 60-90Hz, and this can be a little higher with a female voice if needed. Cheers, Rob. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Setting up slitting saw for round stock? | Antenna | |||
Question abotu setting up shack | General | |||
Need info on setting up a portable station @ mardigras | Broadcasting | |||
fast home remedy to de-magnitaze recording head | Broadcasting | |||
Setting up a vertical antenna | Antenna |