LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
Old April 16th 04, 03:52 PM
Bob Haberkost
 
Posts: n/a
Default

You people who always slag the Texars....it's pretty obvious that you don't
know how to use them.

In the times when I used Texars, in just this sort of configuration, it was
little trouble to have the LOUDEST signal on the dial (with no overmod) yet
sound so much like the source that it was virtually impossible to
differentiate between the source and the air product. Before the Texar was
the big rage it was in the mid 80's, it was virtually a secret weapon in the
processor wars that were running in Pittsburgh....although it's worth noting
that most of my competition had them, too...they just couldn't make them
sound as good.

Computers are pretty worthless tools when one doesn't know how to use them,
either.

--
-----------------------------------------------------------------------------
If there's nothing that offends you in your community, then you know you're not
living in a free society.
Kim Campbell - ex-Canadian Prime Minister - 2004
-----------------------------------------------------------------------------
For direct replies, take out the contents between the hyphens. -Really!-



"John Higdon" wrote in message
...
In article ,
(Robert Zachrisson) wrote:

I have recently come over a used Optimod 8100 whitch is modified with
the Texar RCF-1 unit.
Anyone have any info on the Texar mod?
Any info would be helpful.


The most helpful advice I can probably give you is to attempt to return
the unit to stock Orban and throw the Texar away.

--
John Higdon | Email Address Valid | SF: +1 415 428-COWS
+1 408 264 4115 | Anytown, USA | FAX: +1 408 264 4407



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted ORBAN OPTIMOD AM Chris Broadcasting 1 August 12th 09 04:34 PM
WANTED: Info on VHF Portable Norm VE3CZI Equipment 6 August 31st 04 01:26 AM
WANTED: Info on VHF Portable Norm VE3CZI Equipment 0 August 30th 04 09:45 PM
WANTED: Info on VHF Portable Norm VE3CZI Equipment 0 August 30th 04 09:45 PM
Panasonic RF-4800 info wanted for repair. Al Bolton Equipment 0 May 1st 04 01:11 AM


All times are GMT +1. The time now is 04:06 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017