The VoiceMax prototype field testing continues. There are no issues at
this time.
Several people have emailed me asking questions. Here are some of
those answers:
Currently installed in a Cobra19 DX4 with stock mic.
The VoiceMax module has been set on the prototype at a fixed 15:1
compression ratio.
The Cobra19's limiter pot has been adjusted so that the radio will
maintain a 95% modulation envelope from a whisper... to yelling into
the mic. (statement based on 2" distance from mic)
The "noise gate" has been adjusted to block all sounds below an input
level of 1mV from mic. At this level... and with the stock Cobra
mic... it blocks all tire noise in my vehicle.
Output of module has been adjusted to match the output of the stock
mic. (about 40mV @ 1KHz tone)
The power source for the module is derived from inside the radio and
is fully regulated. The current draw is around 15mA.
Attack time of the modules limiter is about 1mS. Decay time has been
designed to around 500mS.

I plan on starting an FAQ page out at the Telstar Electronics web site
based on these... and other questions I receive.

Please go to http://www.telstar-electronics.com/d...s/VoiceMax.htm
to see the latest details as they become available.

The second prototype unit has been put into mobile operation. We have
also set up an FAQ regarding this new product at
http://www.telstar-electronics.com/d...evelopment.htm

I'm attempting to finalize the feature list for the new VoiceMax
module. I'm torn between having an adjustment for the compression
ratio or having a fixed value. What are your feelings? Is an
adjustment pot for compression a "must"? Thanks for your input.

http://www.telstar-electronics.com/d...evelopment.htm

"Telstar Electronics" wrote in message
ups.com...
I'm attempting to finalize the feature list for the new VoiceMax
module. I'm torn between having an adjustment for the compression
ratio or having a fixed value. What are your feelings? Is an
adjustment pot for compression a "must"? Thanks for your input.

http://www.telstar-electronics.com/d...evelopment.htm



Hahahahahahahahaha!!!! $500 for your splatterbox? "LOL"

http://www.telstar-electronics.com/d...ve2879ABTC.htm



Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

I'm not sure what your comment has to do with my question...

http://www.telstar-electronics.com/d...evelopment.htm

"Telstar Electronics" wrote in message
oups.com...
I'm not sure what your comment has to do with my question...

http://www.telstar-electronics.com/d...evelopment.htm



I'm not surprised...



Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

I'm not surprised...

Thanks for your comment...

http://www.telstar-electronics.com/d...evelopment.htm

On 25 Feb 2007 07:56:23 -0800, "Telstar Electronics"
wrote:

+++I'm attempting to finalize the feature list for the new VoiceMax
+++module. I'm torn between having an adjustment for the compression
+++ratio or having a fixed value. What are your feelings? Is an
+++adjustment pot for compression a "must"? Thanks for your input.
+++
+++http://www.telstar-electronics.com/d...evelopment.htm
****************

Hey you need the conpression man so that the CBers can crank it up and
one can hear an ant fart across the room.

james

I'm attempting to finalize the feature list for the new VoiceMax
module. I'm torn between having an adjustment for the compression
ratio or having a fixed value. What are your feelings? Is an
adjustment pot for compression a "must"? Thanks for your input.

http://www.telstar-electronics.com/d...evelopment.htm

Thanks for your email replies. I don't blame you for not wanting to
post in this forum. The VoiceMax design is in it's final stages, and
the first PC board has started layout. Please visit
http://www.telstar-electronics.com/d...evelopment.htm
for the latest details and scheduled release date for the new VoiceMax
speech processor module. Thanks again for your help in developing this
new product!

www.telstar-electronics.com