LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Old December 4th 03, 09:18 PM
AntiKeyclown
 
Posts: n/a
Default

all twistedhed. he will wire up the radio plus give you some head ta
boot...he swallows!!

Who can take a hard dick
Suck out all the goo
Stuff his nose up a butt crack
And rim it real good too

Twistedhed

Oh Twistedhed does

Twistedhed does cuz he mixes jizz with spit
And thinks it tastes real good

Who can bend it over
And beg for throbbing dick
And when he's finished gettin' pumped
Turn around and lick a prick

Twistedhed

Oh Twistedhed does

Twistedhed does cuz he mixes jizz with spit
And thinks it tastes real good

Twistedhed thinks
Faggot keyclown twinks
Are satisfiyng and delicious
Talk about his childhood wishes
He really blows those faggot bitches

Who can hit a truckstop
Announce that he'll be reamed
Collect ten bucks a trucker
And then suck up all the cream

Twistedhed

Twistedhed does

Twistedhed does cuz he mixes jizz with spit
And thinks it tastes real good


Twistedhed thinks
Faggot keyclown twinks
Are satisfiyng and delicious
Talk about his childhood wishes
He really blows those faggot bitches

Sorry Sammy...we could not resist...







Radioman wrote in message ...
The moderator wrote:

I have a 2002 Ford F150. I want to wire in my CB to a wire that is only hot
when the ignition is on. Where can I get a diagram of the fuse box that
indicates which wire is the correct one.

Thanks in advance.



Forget the fuse box. Go straight to the battery with a fused 10 gauge wire. Also,
run a fused ground wire back to the battery. Use any grommet or other plug through
the firewall. This method will reduce engine/electrical noise and prevent a fire
if your vehicle ground should go bad. Ideally, you should run a large fused wire
to a separate fuse block for use with all the other stuff you will install. Factory
wire is barely adequate for the vehicle. Don't trust a chassis ground. Also, mag
mount antennas are a cludge. Just drill a hole and mount it right the first time.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone know power plug wiring for SBE-33? Dave Barnett Boatanchors 8 August 30th 15 10:21 PM
FCC: Broadband Power Line Systems Paul Policy 0 January 10th 05 05:41 PM
Wanted: Power Supply for TR-4C KA9S-3_Jeff Boatanchors 20 December 16th 04 07:51 AM
Wanted: Power Supply for TR-4C KA9S-3_Jeff Equipment 27 December 12th 04 11:55 PM
Wanted: Power Supply for TR-4C KA9S-3_Jeff Equipment 0 December 8th 04 09:31 PM


All times are GMT +1. The time now is 01:37 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017