Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]() wrote in message ups.com... Both the CB and the PA horn have the usual standard mini jacks on them. Trouble is, when I try to use it, all I get is a horrible piercing feedback whine when I press the mic. So either the Cobra DXIII doesn't work as a PA system, or I am missing something simple. I didn't have the speaker anywhere near the mic, so it's not like it was picking up feedback through that. That is exactly what is happening... With the unit set to PA, turn the volume on the CB all the way down to nothing, and key the mike... Bet the squeal is gone... Now turn up the volume to just where is starts to squeal, then back it down just a little. That point is as loud as you will be able to get the PA... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Location of focus of feed horn? | Antenna | |||
Location of focus of feed horn? | Equipment | |||
FS: 5 Watt VALCOM Paging Horn / Amp | Equipment | |||
FS: 5 Watt VALCOM Paging Horn / Amp | Equipment | |||
FS: 5 Watt VALCOM Paging Horn / Amp | Swap |