Home |
Search |
Today's Posts |
#8
|
|||
|
|||
Of all the signals in the receive passband, you need to select one to deal
with.When you do that, every program I've seen so far sets the transmit audiooffset, i.e. the effective transmit frequency, to the received audio offset.Assuming of course that both xmit and rcv VFO's are on the same frequency.This is typically done automatically by the software for you. Your audio will be at the same tone as the receive if you are clicked onto the receive waterfall, which you would be in order to receive the station's data. So, no changes in transmitter or software will be needed. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Newbie digital modes question | Digital | |||
USB soundcards for digital modes | Digital | |||
USB soundcards for digital modes | Digital | |||
New Echolink & Other Digital Modes Interface Board | Equipment | |||
Why digital modes are few used | Policy |