LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
Old January 7th 05, 10:43 PM
Jim
 
Posts: n/a
Default

It's called "Olivia." It's a MFSK variant with multiple tones and bandwidth
settings which are currently user selectable The default setup is 32 tones
with a bandwidth of 1000Hz. The mode uses forward error correction allowing
weak signal reception. The made is being developed by Pawel Jalocha,
SP9VRC.



"VE3ELQ" wrote in message
...
On Fri, 07 Jan 2005 14:39:36 +1100, Bob Bob
wrote:
I tried that and no go with MixW2.12, the brackets are 500hz wide in
that mode. It was there again last night on 3583 along with some good
DX that I worked, a G4 and some RUs, the band was long skip and
reasonably quiet. Still dont know what it is but at 1000hz wide its
not narrow band and it was well into the PSK region with the PSK31
signals all below it. It might become a problem unless they move up or
down a little and leave 3 khz free for the truly narrow band modes.
73s Nigel VE3ELQ

At 1000Hz wide? How about MT63?

Cheers Bob VK2YQA






 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Icom IC-745 question (how does CW mode work?) Joel Kolstad Equipment 30 November 28th 04 03:18 AM
Mode for Best Throughput? Andy Knitt Digital 22 November 7th 03 01:31 AM
Mode for Best Throughput? Andy Knitt Digital 0 November 5th 03 02:56 AM
Icom T2H ANI Mode Michael Ko Equipment 10 October 23rd 03 07:59 PM
Icom T2H ANI Mode Michael Ko Equipment 0 October 9th 03 09:13 PM


All times are GMT +1. The time now is 03:03 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017