Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]() "Ian Jackson" wrote in message ... In message , S&DWS via rec.radio.info Admin writes Sheffield & District Wireless Society /////////////////////////////////////////// Foundation Course Material in PDF Format Posted: 18 Aug 2017 04:04 AM PDT http://sheffieldwireless.org/2017/08...in-pdf-format/ PDF File versions for the Foundation Course Please may I offer one correction: In 'Antennas & Feeders', the information about BNC connectors, you are warned "Take care not to mix incompatible 50 and 75 Ohm versions which have different inner pin sizes". This is NOT totally correct. While the profile of the pins are slightly different (the 50 ohm usually has a somewhat stubbier point), the diameters are the same. The difference in characteristic impedance is achieved by the amount of PTFE dielectric. As a result, you CAN physically mate 50 and 75 ohm BNC connectors (both sexes). when I was newly licensed and poor I used 75 ohm TV coax and belling lee connectors on HF and got away with it ....... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
NON-copyright material | Antenna | |||
Antenna Material | Antenna | |||
aNTENNA MATERIAL | Antenna | |||
Anechoic Material | Homebrew | |||
Anechoic Material | Homebrew |