"Keyboard In The Wilderness" wrote in message news:awdfd.76614$hj.65646@fed1read07...
Telnet connections can be found at URL:

http://www.cpcug.org/user/wfeidt/Misc/cluster.html


10M is pretty grim now as we are on the down slide of the solar cycle -- but
some openings are still occurring as you will see when you connect to a
packet cluster via telnet.


--
The Anon Keyboard
I doubt, therefore I might be

About a decade ago, QST ran an article about a ham in Texas that had
DX contacts --daily--, even during sunspot minima.

Awful news, I guess.

But even a General can get on 20M.

"Keyboard In The Wilderness" wrote in message news:awdfd.76614$hj.65646@fed1read07...
Telnet connections can be found at URL:

http://www.cpcug.org/user/wfeidt/Misc/cluster.html


10M is pretty grim now as we are on the down slide of the solar cycle -- but
some openings are still occurring as you will see when you connect to a
packet cluster via telnet.


--
The Anon Keyboard
I doubt, therefore I might be

About a decade ago, QST ran an article about a ham in Texas that had
DX contacts --daily--, even during sunspot minima.

Awful news, I guess.

But even a General can get on 20M.

Telnet connections can be found at URL:

http://www.cpcug.org/user/wfeidt/Misc/cluster.html



10M is pretty grim now as we are on the down slide of the solar cycle -- but
some openings are still occurring as you will see when you connect to a
packet cluster via telnet.


--
The Anon Keyboard
I doubt, therefore I might be



"G. Doughty" wrote in message
news:lidfd.79932$cJ3.34476@fed1read06...
Hello to all,

Looking to give DX a try. I have two attic dipoles for 20 and 40 meters.
I
have a ten-tec scout 555 that runs 50 watts wide open. Anyways, I am
trying
to find a "node" to use on my laptop but am unsure what I need. I think
all
I need is a 10m radio (I have an htx 10) antenna (easy enough for a dipole
in the attic) and a computer. Is that true? Also, with the computer, I
am
aware of Telnet, but how do I access a local node? I am probably talking
out of my arse, but I think it would be interesting to get it all hooked
up.
I use a computer logger but I think I can access the node through a phone
if
need be. If it sounds like I'm confused, I am. A little help will go a
long way.

Thanks so much

"G. Doughty" wrote in message
news:lidfd.79932$cJ3.34476@fed1read06...
Hello to all,

Looking to give DX a try. I have two attic dipoles for 20 and 40 meters.
I
have a ten-tec scout 555 that runs 50 watts wide open. Anyways, I am
trying
to find a "node" to use on my laptop but am unsure what I need. I think
all
I need is a 10m radio (I have an htx 10) antenna (easy enough for a dipole
in the attic) and a computer. Is that true? Also, with the computer, I
am
aware of Telnet, but how do I access a local node? I am probably talking
out of my arse, but I think it would be interesting to get it all hooked
up.
I use a computer logger but I think I can access the node through a phone
if
need be. If it sounds like I'm confused, I am. A little help will go a
long way.

Thanks so much



It might be easiest at this point in your learning curve to simply dial up
and down the band of interest and find the stations that way. You don't
have to have a computer or DX spotting aids or anything else to work DX.
The DX spots are from all over the country and thus the DX listed might not
be audible in your area due to band conditions. Even a "local node" has
listings from all over that you may or may not be able to hear. At least by
dialing, you will find stations that you can hear in your location.

There are several ways that you can use the DX spotting aids.

1. Connect your computer to the internet. The use a terminal program like
Hyperterm (free with windows) use the connect function to connect to the
system that you want. I happen to use www.dxspots.com. The first type you
connect, it will ask for your call sign, location and other info. After
that it will just ask for the call sign. Some of the logging programs allow
you to bring up the DX spotting sites without using a separate program.

2. Instead of using a terminal program, you can connect to the DX site
directly. Just bring up Internet Explorer and type in www.dxspots.com and
you can see the spots that way.

3. Instead of the internet, you can use 2m packet radio in some (but not
all areas). Here you need a TNC or interface to connect between radio and
computer. Once you have the hardware all hooked together (2m packet radio,
TNC or interface, and computer), you will need software to run it. If you
go with the TNC, you can just use a simple terminal program like Hyperterm.
If you go with just an interface between computer and radio, you will need
software to decode the packet info.

Dee D. Flint, N8UZE

"G. Doughty" wrote in message
news:lidfd.79932$cJ3.34476@fed1read06...
Hello to all,

Looking to give DX a try. I have two attic dipoles for 20 and 40 meters.
I
have a ten-tec scout 555 that runs 50 watts wide open. Anyways, I am
trying
to find a "node" to use on my laptop but am unsure what I need. I think
all
I need is a 10m radio (I have an htx 10) antenna (easy enough for a dipole
in the attic) and a computer. Is that true? Also, with the computer, I
am
aware of Telnet, but how do I access a local node? I am probably talking
out of my arse, but I think it would be interesting to get it all hooked
up.
I use a computer logger but I think I can access the node through a phone
if
need be. If it sounds like I'm confused, I am. A little help will go a
long way.

Thanks so much



It might be easiest at this point in your learning curve to simply dial up
and down the band of interest and find the stations that way. You don't
have to have a computer or DX spotting aids or anything else to work DX.
The DX spots are from all over the country and thus the DX listed might not
be audible in your area due to band conditions. Even a "local node" has
listings from all over that you may or may not be able to hear. At least by
dialing, you will find stations that you can hear in your location.

There are several ways that you can use the DX spotting aids.

1. Connect your computer to the internet. The use a terminal program like
Hyperterm (free with windows) use the connect function to connect to the
system that you want. I happen to use www.dxspots.com. The first type you
connect, it will ask for your call sign, location and other info. After
that it will just ask for the call sign. Some of the logging programs allow
you to bring up the DX spotting sites without using a separate program.

2. Instead of using a terminal program, you can connect to the DX site
directly. Just bring up Internet Explorer and type in www.dxspots.com and
you can see the spots that way.

3. Instead of the internet, you can use 2m packet radio in some (but not
all areas). Here you need a TNC or interface to connect between radio and
computer. Once you have the hardware all hooked together (2m packet radio,
TNC or interface, and computer), you will need software to run it. If you
go with the TNC, you can just use a simple terminal program like Hyperterm.
If you go with just an interface between computer and radio, you will need
software to decode the packet info.

Dee D. Flint, N8UZE

G. Doughty wrote:
Hello to all,

Looking to give DX a try. I have two attic dipoles for 20 and 40 meters. I
have a ten-tec scout 555 that runs 50 watts wide open. Anyways, I am trying
to find a "node" to use on my laptop but am unsure what I need. I think all
I need is a 10m radio (I have an htx 10) antenna (easy enough for a dipole
in the attic) and a computer. Is that true? Also, with the computer, I am
aware of Telnet, but how do I access a local node? I am probably talking
out of my arse, but I think it would be interesting to get it all hooked up.
I use a computer logger but I think I can access the node through a phone if
need be. If it sounds like I'm confused, I am. A little help will go a
long way.

I wouldn't worry about a spotting network at this point in the game.
With simple antennas and low power, anything that gets spotted will
probably be difficult to impossible to work. You're better off tuning
around the bands and finding the DX yourself.

It can be helpful to look at the spots to get a general idea of what
conditions are like. http://oh2aq.kolumbus.com/dxs is a good place to
start. It'll tell you what part of the world is being heard in what
other part of the world on what band.

If you do decide to try to access a local cluster node, you need a *2m*
radio and antenna, and a packet TNC. You'll have to ask locally about
what frequency is in use -- in some areas it is possible there is no
accessible local node. (at which point you're best off using the
Internet)

================================

A few DXing hints:

- If you aren't already proficient at CW, learn it. Practice, practice,
practice... Low power is better at breaking pileups on CW.

- Get on for contests. A LOT of DX will be on. (and the biggest phone
contest of all is this coming weekend) A lot will be on from countries
that can be difficult to work at other times. And especially on Sunday,
DX in some overall very rare countries will be begging for QSOs - will
be easy to work. If conditions are any good at all, you ought to be
able to work 30 countries or more with your station this weekend.

- Be sure you have envelopes at the QSL Bureau. That's how most of your
DX will QSL.
--
Doug Smith W9WI
Pleasant View (Nashville), TN EM66
http://www.w9wi.com

G. Doughty wrote:
Hello to all,

Looking to give DX a try. I have two attic dipoles for 20 and 40 meters. I
have a ten-tec scout 555 that runs 50 watts wide open. Anyways, I am trying
to find a "node" to use on my laptop but am unsure what I need. I think all
I need is a 10m radio (I have an htx 10) antenna (easy enough for a dipole
in the attic) and a computer. Is that true? Also, with the computer, I am
aware of Telnet, but how do I access a local node? I am probably talking
out of my arse, but I think it would be interesting to get it all hooked up.
I use a computer logger but I think I can access the node through a phone if
need be. If it sounds like I'm confused, I am. A little help will go a
long way.

I wouldn't worry about a spotting network at this point in the game.
With simple antennas and low power, anything that gets spotted will
probably be difficult to impossible to work. You're better off tuning
around the bands and finding the DX yourself.

It can be helpful to look at the spots to get a general idea of what
conditions are like. http://oh2aq.kolumbus.com/dxs is a good place to
start. It'll tell you what part of the world is being heard in what
other part of the world on what band.

If you do decide to try to access a local cluster node, you need a *2m*
radio and antenna, and a packet TNC. You'll have to ask locally about
what frequency is in use -- in some areas it is possible there is no
accessible local node. (at which point you're best off using the
Internet)

================================

A few DXing hints:

- If you aren't already proficient at CW, learn it. Practice, practice,
practice... Low power is better at breaking pileups on CW.

- Get on for contests. A LOT of DX will be on. (and the biggest phone
contest of all is this coming weekend) A lot will be on from countries
that can be difficult to work at other times. And especially on Sunday,
DX in some overall very rare countries will be begging for QSOs - will
be easy to work. If conditions are any good at all, you ought to be
able to work 30 countries or more with your station this weekend.

- Be sure you have envelopes at the QSL Bureau. That's how most of your
DX will QSL.
--
Doug Smith W9WI
Pleasant View (Nashville), TN EM66
http://www.w9wi.com