In article 1390022.ghXzVc9c8P@viviana,
Ralf Ballis - DL2MRB wrote:

Try to connect a MFJ-929 and a Yaesu FT-857. Use a MFJ-5114Y cable to
connect.

Which parameter should I select on both for start tuning process by push the
tune button on tuner?

You'll need to inform the FT-857 that it has a CAT-compatible tuner
attached. Check your owner's manual. If I recall correctly, there
are two menu items that you'll need to set. One of them tells the
radio that there's a slave CAT device attached, and the other tells it
to talk to a tuner via the CAT port.

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

Thank you for answering.

Dave Platt wrote:

One*of*them*tells*the
radio that there's a slave CAT device attached, and the other tells it
to talk to a tuner via the CAT port.

When I select a tuner on FT-857 options, CAT type option turn automatically
to tuner and isn't changeable.

Since I try to connect and several options on this tuner, think I notice a
burned smell coming out from this tuner.
Works normally, maybe some device burned down by using any wrong option on
this MFJ-929.

73

Ralf, DL2MRB
--
Vy 73 es 55 de Ralf, DL2MRB