Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
Does anybody know of a 5 or 6 KHz wide AM filter
for the Icom 706mkiig rig? Leland- There is an FL-102, 6 KHz 9 MHz IF AM filter listed in an old catalog for the IC-775DSP. AES has it still listed, but as discontinued. Since this radio uses some of the same 9 MHz filters, it might be possible the FL-102 would be compatible with the IC-706 if a) you can find a place to put it, and b) you can find a way to select it while in AM mode. I have the original IC-706 with a narrow sideband filter installed. When in AM mode, it is possible to select a "NAR" filter, but I'm not sure if it is choosing the stock SSB filter, or the optional narrow SSB filter. I suspect it is using the stock filter, but haven't done a test to find out. I suppose the easiest case would be if the FL-102 fits in place of your original AM filter. 73, Fred, K4DII |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Collins Mechanical Filter ID. | Boatanchors | |||
FA: Collins 200Hz Crystal Filter for 75S3B & 75S3C Receivers... | Boatanchors | |||
Help with HQ-160 slot filter and product detector | Boatanchors | |||
Collins 51j-4 Receiver Filter Replacemt/Bypass | Boatanchors | |||
Collins 51j-4 Receiver Filter Replacemt/Bypass | Boatanchors |