Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
On Sat, 01 Nov 2003 08:20:02 GMT, "Dennis"
wrote: A LDG RT-11 feeding a ground mounted Butternut HF2V with TBR 160Mtr loading kit at the base, ( resonant on 3 freqs, 1.8mhz/3.65 mhz/7.1mhz) to get freqs above 7.100 OR a RT-11 base mounted feeding a CushCraft R8 to get Freqs 3.65mhz/ 1.8mhz ??? as i have both antennas here i wish to dispose of one, I would appreciate any comments from hams that have used the LDG range of tuners Kind Regards de Dennis Somehow, I'm guessing you'll have a lot better luck with an antenna that's properly set up for the low bands, with the tuner bringing in the high bands, than trying the inverse, where the tuner would be trying to replace the big loading coils & radials for the low bands. Might burn out the tuner. Bob k5qwg |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Best Home Base Work | Digital | |||
Best Home Base Work | Digital | |||
R/S Solderless BNC Connectors: How Can They Possibly Work Well ? | Antenna | |||
Requesting Your Opinion on Boatanchors for AM work | Boatanchors | |||
Requesting Your Opinion on Boatanchors for AM work | Boatanchors |