| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
I just reinstalled my Icom back into my vehicle after it being out for
several months, I was listening to 20 meters yesterday and tried to get into a few of the pileups that were going on. A second or two in keying up to ID my call, the radio shuts off. I also have developed what sounds like a ground hum on VHF. For an antenna I am using a Yaesu ATAS-100 with a AM-COM controller. When tuning the antenna in, I get to very low SWR's on the meter, so I don't think that it is a high SWR that is causing it. I have checked all connections and they are tight, so any thing further I can check? Thanks Kevin w0klh |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FA:Icom IC-706MKIIG | Swap | |||
| FS Icom 706MKIIG | Swap | |||
| Icom 706MkIIG PL Tone Problem | Equipment | |||
| Mobile Icom 706MKIIg shielding problem ? | Equipment | |||
| Mobile Icom 706MKIIg shielding problem ? | Equipment | |||