Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() Yes !!!!!!!!!!! He is always gottaway.... with his FT1000D..... "Rusty O" schreef in bericht ink.net... Rollo Tomassi....... Isn't he the evil one that gets away his crimes? From the movie "L.A. Confidential". Rusty O |
#2
![]() |
|||
|
|||
![]()
you say "if i touch the coils, the RX comes back"
is it then getting ham station as ok should work or radio station thru mutual coupling with your finger.?? mike "Rollo Tomassi" wrote in message ... Hello, My Yeasu FT1000D has no RX on the SUB-receiver until ... i touch the coils from the RF-section T1028 and T6001 in the SuB-RXsection. The same is that on D 1060 on the RF-section. The RX on the sub is then coming back. Between T1028/D1060 and T6001 is a bleu coax-cable. I checked the bleu cable who connects the SUB-RX section with the RF-section but that cable is OK. I checked relay 1004 on the RF-section but is OK. Main-RX is 100% . Do someone has a solution except to bring it to the repairman ( He is on holiday,HI) --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.719 / Virus Database: 475 - Release Date: 12/07/2004 |
#3
![]() |
|||
|
|||
![]()
Rollo Tomassi.......
Isn't he the evil one that gets away his crimes? From the movie "L.A. Confidential". Rusty O |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Channel Master Rotor Malfunction ???? | Equipment | |||
FT1000D extended TX | Equipment | |||
FT1000D extended TX | Equipment | |||
FT1000(D) Advice Needed | Equipment | |||
FT1000(D) Advice Needed | Equipment |