Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old October 16th 11, 11:13 PM
Junior Member
 
First recorded activity by RadioBanter: Oct 2011
Location: Cheshire
Posts: 2
Default Kenwood TS 2000 problem

I brought a Kenwood TS 2000x in January this year. I got a problem with the rig after 6 months and sent it back to Kenwood through the supplier Water and Stanton. I have just got the rig back after being repaired under warrantee. All seems to be fine for now but I am worried that this may be a 'problem rig' - something that I am going to get lots of trouble with in the future.

The problem was that the rig stopped TX & RX and the display stopped showing the frequence. Doing a factory reset got rid of the problem for a short time before coming back. This was repaired but I don't know what kenwood did to fix the problem.

Has anyone got any experience of this rig - should I be worried?
  #2   Report Post  
Old October 21st 11, 04:58 PM
Senior Member
 
First recorded activity by RadioBanter: Jan 2011
Posts: 390
Default

The problem is that the TS 2000 is a compromise between a HF and a VHF radio and it is not the best receiver possible for your purposes.

There is some issues in all of those models and you were lucky that yours quit working while it was still under warranty.

Your problem is a known problem, but the problem is that it does not happen to every one made.
I would imagine that they replaced the board with the microprocessor with a replacement board, not new, but reconditioned and that they had done some type of update to the software that controls the radio.

If you are scared that the radio is going to quit working, then I would sell it now while it still works.
But if all you use it for is to check in on the local 2 meters repeaters and make a couple of contacts on the HF and don't care how sensitive the receive is - it should be find.

Eventually something else will happen to it and eventually Kenwood will replace it with a updated version that does not have the same capabilities.

The problem is there is a lot to go wrong in such a small box that it is a matter of time until something happens again.
  #3   Report Post  
Old October 21st 11, 05:37 PM
Junior Member
 
First recorded activity by RadioBanter: Oct 2011
Location: Cheshire
Posts: 2
Default

Quote:
Originally Posted by Channel Jumper View Post
The problem is that the TS 2000 is a compromise between a HF and a VHF radio and it is not the best receiver possible for your purposes.

There is some issues in all of those models and you were lucky that yours quit working while it was still under warranty.

Your problem is a known problem, but the problem is that it does not happen to every one made.
I would imagine that they replaced the board with the microprocessor with a replacement board, not new, but reconditioned and that they had done some type of update to the software that controls the radio.

If you are scared that the radio is going to quit working, then I would sell it now while it still works.
But if all you use it for is to check in on the local 2 meters repeaters and make a couple of contacts on the HF and don't care how sensitive the receive is - it should be find.

Eventually something else will happen to it and eventually Kenwood will replace it with a updated version that does not have the same capabilities.

The problem is there is a lot to go wrong in such a small box that it is a matter of time until something happens again.
Thanks for the info. I spent a lot of money on this rig and I am disappoint that it is not as reliable as it should be. I will probably keep it until the warrantee is finished and then look at trading it in for something better.

I think I will do a bit more research next time!
  #4   Report Post  
Old December 11th 11, 01:24 AM
Banned
 
First recorded activity by RadioBanter: Dec 2011
Location: Turkey
Posts: 1
Send a message via ICQ to Allovewschess
Default

does dilantin cause excessive saliva production, buy dilantin online, dilantin pediatric overdose
  #5   Report Post  
Old December 11th 11, 06:12 AM
Banned
 
First recorded activity by RadioBanter: Dec 2011
Location: Mexico
Posts: 2
Send a message via ICQ to Safiraya
Default



  #6   Report Post  
Old January 8th 12, 10:00 PM
Senior Member
 
First recorded activity by RadioBanter: Jan 2011
Posts: 390
Default

You are welcome.

My suggestion to you is to sell it now - while it still works.
Don't wait until the warranty is up.

My next suggestion would be for the next radio to be a TS 590S, which is a far superior radio to the one you presently own.

Buy a mobile or other radio for your two meters / four forty needs.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kenwood TS-2000 another problem Boris Tušan Equipment 1 March 26th 10 09:15 PM
Kenwood TS-2000 problem Boris Tušan Equipment 4 September 2nd 09 10:50 PM
TSB-2000 Problem gus Equipment 0 August 4th 03 03:36 AM
TSB-2000 Problem gus Equipment 0 August 4th 03 03:36 AM
Kenwood TS-2000 keying problem Jon Dahl General 2 July 18th 03 06:38 PM


All times are GMT +1. The time now is 10:13 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017