| Home |
| Search |
| Today's Posts |
|
#11
October 25th 04, 03:09 AM
|
|||
|
|||
The James Millen meters are excellent, especially the solid state one. I've
used both with excellent results... |
|
#12
October 25th 04, 03:09 AM
|
|||
|
|||
|
The James Millen meters are excellent, especially the solid state one. I've
used both with excellent results... |
|
#13
October 25th 04, 03:09 AM
|
|||
|
|||
|
The James Millen meters are excellent, especially the solid state one. I've
used both with excellent results... |
|
#14
October 26th 04, 12:34 AM
|
|||
|
|||
|
"BFoelsch" wrote in message ... Does anybody here have any honest-to-goodness experience with Grid Dip Meters? Over the years, I have owned them all- Heath tube, solid state, tunnell ( probably the worst or maybe the MFJ add on kit for the 259 analyzer is the worst), Knight, Millen, Eico. Heads above all the rest are the Measurements model 159. You can take a 1 meter rod- hold the dipper head 2-3" away from the center (current loop) and get a huge deflection at 150 MHz. Never saw another meter that would do that at any distance. I keep spare heads, tubes and coil sets in case of disaster. Dale W4OP |
|
#15
October 26th 04, 12:34 AM
|
|||
|
|||
|
"BFoelsch" wrote in message ... Does anybody here have any honest-to-goodness experience with Grid Dip Meters? Over the years, I have owned them all- Heath tube, solid state, tunnell ( probably the worst or maybe the MFJ add on kit for the 259 analyzer is the worst), Knight, Millen, Eico. Heads above all the rest are the Measurements model 159. You can take a 1 meter rod- hold the dipper head 2-3" away from the center (current loop) and get a huge deflection at 150 MHz. Never saw another meter that would do that at any distance. I keep spare heads, tubes and coil sets in case of disaster. Dale W4OP |
|
#16
October 26th 04, 12:34 AM
|
|||
|
|||
|
"BFoelsch" wrote in message ... Does anybody here have any honest-to-goodness experience with Grid Dip Meters? Over the years, I have owned them all- Heath tube, solid state, tunnell ( probably the worst or maybe the MFJ add on kit for the 259 analyzer is the worst), Knight, Millen, Eico. Heads above all the rest are the Measurements model 159. You can take a 1 meter rod- hold the dipper head 2-3" away from the center (current loop) and get a huge deflection at 150 MHz. Never saw another meter that would do that at any distance. I keep spare heads, tubes and coil sets in case of disaster. Dale W4OP |
| Reply |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ohio/Penn DX Bulletin #649 | Dx | |||
| Ohio/Penn DX Bulletin #649 | Dx | |||
| Ohio/Penn DX Bulletin #629 | Dx | |||
| Ohio/Penn DX Bulletin #629 | Dx | |||
| Ohio/Penn DX Bulletin #617 | Dx | |||
Linear Mode
