Insofar as the tape deck is used to record reception of amateur radio,
what's the best approach to repairing tape decks where the nylon-ish
band used for take-up has gone completely squishy (and resulted in
a build-up of tape inside the deck instead of on the take-up spool)?

I wonder if anyone has attempted a long-term solution by using the
miniature timing belts that are available these days?

On Fri, 10 Apr 2015 12:37:51 +0100, gareth wrote:

what's the best approach to repairing tape decks where the nylon-ish
band used for take-up has gone completely squishy (and resulted in a
build-up of tape inside the deck instead of on the take-up spool)?

Just do the same as other people, for example, search on eBay for "tape
recorder belt".


Charlie.



--
www.votenationalbird.com/

"Charlie" wrote in message
...
On Fri, 10 Apr 2015 12:37:51 +0100, gareth wrote:

what's the best approach to repairing tape decks where the nylon-ish
band used for take-up has gone completely squishy (and resulted in a
build-up of tape inside the deck instead of on the take-up spool)?

Just do the same as other people, for example, search on eBay for "tape
recorder belt".

But that's £10 a time for a loop of elastic!

On Fri, 10 Apr 2015 16:33:15 +0100, gareth wrote:

But that's £10 a time for a loop of elastic!


Sometimes you have to shoulder the pain and dust off the wallet!


Charlie.


--
www.votenationalbird.com/

On Sat, 11 Apr 2015, Charlie wrote:

On Fri, 10 Apr 2015 16:33:15 +0100, gareth wrote:

But that's £10 a time for a loop of elastic!


Sometimes you have to shoulder the pain and dust off the wallet!


When I needed a new turntable belt about five years ago, it cost
me around $8.00, but that was at a local store that I could actually
visit. It did seem expensive, but I spent quite a bit on it in 1978, and
it's been fine ever since, except that belt became too loose. So eight
dollars upkeep on something that old is pretty good.

Michael

"Michael Black" wrote in message
xample.org...
On Sat, 11 Apr 2015, Charlie wrote:

On Fri, 10 Apr 2015 16:33:15 +0100, gareth wrote:

But that's £10 a time for a loop of elastic!


Sometimes you have to shoulder the pain and dust off the wallet!


When I needed a new turntable belt about five years ago, it cost
me around $8.00, but that was at a local store that I could actually
visit. It did seem expensive, but I spent quite a bit on it in 1978, and
it's been fine ever since, except that belt became too loose. So eight
dollars upkeep on something that old is pretty good.

The ITT mono deck is at least 46 years old, and not identified in the
list of spare belts.

On Fri, 10 Apr 2015, gareth wrote:

Insofar as the tape deck is used to record reception of amateur radio,
what's the best approach to repairing tape decks where the nylon-ish
band used for take-up has gone completely squishy (and resulted in
a build-up of tape inside the deck instead of on the take-up spool)?

I wonder if anyone has attempted a long-term solution by using the
miniature timing belts that are available these days?

If I was stuck, I'd just pull another tape deck off the pile of garbage.

They are now being tossed out, "nobody wants them", so they are readily
available cheap.

But the only need for keeping such a thing is to play existing tapes.

A computer can record fine. So can an MP3 player.

A few years ago, I came upon a reel to reel tape deck at a garage sale,
only ten dollars. It was a better grade than the language lab type tape
deck. I got all excited, then I realized that no matter how much I wanted
one decades ago, I have no use for it now. The other things are better at
recording, and take up less space. So I couldn't even be bothered
bringing the thing home merely to look at.

The 8track recording deck next to it wsa only five dollars, even less
practical use, though a novelty since 8track recorders were never a big
part of the market, most just wanted players.

If you really want to fix it, look for hints (there must be stuff about
cassette decks) at http://www.repairfaq.org

Michael

"Michael Black" wrote in message
xample.org...
If you really want to fix it, look for hints (there must be stuff about
cassette decks) at http://www.repairfaq.org

The OTHER deck, not part of the shack and therefore OT, was my wife's
18th birthday present, so it has sentimental value, even though it be mono!

In rec.radio.amateur.homebrew gareth wrote:
Insofar as the tape deck is used to record reception of amateur radio,
what's the best approach to repairing tape decks where the nylon-ish
band used for take-up has gone completely squishy (and resulted in
a build-up of tape inside the deck instead of on the take-up spool)?

I wonder if anyone has attempted a long-term solution by using the
miniature timing belts that are available these days?

If you're keen on the subject of old tapedecks, check out tapeheads.net.
There's info there on maintenance, values, wanted, forsale, and so on.


--
David Griffith
--- Put my last name where it belongs