Hi Greg,

The answer to your question on "what equipment is ideal" greatly depends
on your personal location and circumstances.

Some general thoughts:

If you're just starting out, get a less-expensive rig. You don't need to
start out with something like an FT-1000. Are you interested in operating
voice (FM/SSB, or even AM?), CW, or digital? Some rigs handle some modes
better than others. Do your research.

I like the idea of built-in ATUs for making my installation easier
too. What do you suggest?

Automatic tuners can make life a lot easier. You don't need a rig with one
built-in--there are good external ones that inexpensive. I've heard good
stuff about the LDG Z-100. I have the LDG QRP autotuner, and it's great. I
also have a manual MFJ 969, which is nice. Nothing fancy, but it works.

Also, what type of antenna should I be looking at?

Depends on where you are and what your restrictions are. I'd contact a
local Ham club and consult with the members about what would be
appropriate.

Do I gather that I should be looking at HF equipment?

Assuming you have a license permitting you to operate on the HF bands,
yes.

73,

-Josh, AE6IQ

--


Remove the reversed "nospam" in the address.

Greg.S wrote:
I'm looking around at starter equipment that is simple(!) for my
ability level.

I like the idea of built-in ATUs for making my installation easier
too. What do you suggest?

Also, what type of antenna should I be looking at?

Do I gather that I should be looking at HF equipment?

Many thanks... Greg
I susgest you find your local radio club and make contact . your location ?

Joshua G Senecal wrote in message avis.edu...
Hi Greg,

The answer to your question on "what equipment is ideal" greatly depends
on your personal location and circumstances.

Some general thoughts:

If you're just starting out, get a less-expensive rig. You don't need to
start out with something like an FT-1000. Are you interested in operating
voice (FM/SSB, or even AM?), CW, or digital? Some rigs handle some modes
better than others. Do your research.

Voice (no idea what band - a lot for me to learn yet!)


I like the idea of built-in ATUs for making my installation easier
too. What do you suggest?

Automatic tuners can make life a lot easier. You don't need a rig with one
built-in--there are good external ones that inexpensive. I've heard good
stuff about the LDG Z-100. I have the LDG QRP autotuner, and it's great. I
also have a manual MFJ 969, which is nice. Nothing fancy, but it works.

Okay, thank you I will look those up.


Also, what type of antenna should I be looking at?

Depends on where you are and what your restrictions are. I'd contact a
local Ham club and consult with the members about what would be
appropriate.

Good idea. I'll speak to the Leicester Radio Society (LRS).


Do I gather that I should be looking at HF equipment?

Assuming you have a license permitting you to operate on the HF bands,
yes.

73,

Perhaps I should be clearer. Is HF the band I will be allowed to use
at foundation level? Hope that isn't a silly question.


-Josh, AE6IQ

Thank you Josh for your help.

atec wrote in message ...
Greg.S wrote:
I'm looking around at starter equipment that is simple(!) for my
ability level.

I like the idea of built-in ATUs for making my installation easier
too. What do you suggest?

Also, what type of antenna should I be looking at?

Do I gather that I should be looking at HF equipment?

Many thanks... Greg
I susgest you find your local radio club and make contact . your location ?

I'm in Bushby, Leicestershire. I'll contact Leicester's group. Thank you

Hi Greg,

speak with the folks at the local club. Nothing better than a local to help you. If they
cannot answer your questions, take to the internet. Many sites with info such as the RSGB
site at http://www.rsgb.org.uk

If I am well informed you will be able to use HF but I suggest you look into something
which will also cover 50 & 144Mhz such as the Yaesu FT847 (or similar - cheaper) radio's.
In your area VHF is also being used and will give you a completely different perspective.
For VHF you need (preferably) a horizontal beam.

Again - it will depend on what YOU want to do. This hobby has something for everyone....

73 and GL on the test!

On 26 Apr 2005 22:56:49 -0700, (Greg.S) wrote:

Joshua G Senecal wrote in message avis.edu...
Hi Greg,

The answer to your question on "what equipment is ideal" greatly depends
on your personal location and circumstances.

Some general thoughts:

If you're just starting out, get a less-expensive rig. You don't need to
start out with something like an FT-1000. Are you interested in operating
voice (FM/SSB, or even AM?), CW, or digital? Some rigs handle some modes
better than others. Do your research.

Voice (no idea what band - a lot for me to learn yet!)


I like the idea of built-in ATUs for making my installation easier
too. What do you suggest?

Automatic tuners can make life a lot easier. You don't need a rig with one
built-in--there are good external ones that inexpensive. I've heard good
stuff about the LDG Z-100. I have the LDG QRP autotuner, and it's great. I
also have a manual MFJ 969, which is nice. Nothing fancy, but it works.

Okay, thank you I will look those up.


Also, what type of antenna should I be looking at?

Depends on where you are and what your restrictions are. I'd contact a
local Ham club and consult with the members about what would be
appropriate.

Good idea. I'll speak to the Leicester Radio Society (LRS).


Do I gather that I should be looking at HF equipment?

Assuming you have a license permitting you to operate on the HF bands,
yes.

73,

Perhaps I should be clearer. Is HF the band I will be allowed to use
at foundation level? Hope that isn't a silly question.


-Josh, AE6IQ

Thank you Josh for your help.

Hi Greg, I have a 746 with ATU at home and a 706 NO ATU in built in the car
you would find these good radios for the Foundation level as you can run
theses radio`s at 10w no prob`s, I have spoken to a lots of people on 10w on
80m and with good signal reports,not sure on your price range? Also make up
a G5RV very easy done and great for all freq, let me know if you want the
wire lengths and I will send them 2 you
Good luck on your exam
Geoff
Vk3vfl
"Greg.S" wrote in message
om...
I'm looking around at starter equipment that is simple(!) for my
ability level.

I like the idea of built-in ATUs for making my installation easier
too. What do you suggest?

Also, what type of antenna should I be looking at?

Do I gather that I should be looking at HF equipment?

Many thanks... Greg