Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
On Tue, 04 Jul 2006 06:28:16 -0000, Dave Platt wrote:
There may be a cheaper way for you to get the gain you need, from your existing equipment, without spending any money at all. It's possible to fabricate a corner reflector, or (even better) a parabolic reflector, out of material as inexpensive as cardboard (or posterboard or something like that) lined with aluminum foil. Simply make one, and then set it behind your existing router's vertical antenna... aim the parabola in the direction of your shed and place the router's antenna at the focal point of the parabola. Aim carefully, and it wouldn't be surprising for you to get 8 - 10 dB of additional gain. Hmm. I wonder. This is too good to be true. So, I will be a bit critical with you (i.e., the scientific method) just to "test" the assumption so that I can be sure I understand your position. Assuming a 9 dBd increase in the directional gain from putting a pie tin behind one of my existing router antennas, that equates to either 280 or 380 feet of range based on the calculations below. a) 9 dBd = 10^(9/10) power gain ~= 8x power gain b) 8x power gain = sqrt(8) range gain ~= 2.8X range gain c) 100 foot range * 2.8 ~= 280 foot range I'm a bit confused about the "range gain". May I ask if thta 280 foot range is the total range or the range improvement? That is, is my range with a pie tin behind the antenna 280 feet in toto; or is the range now the 100 original feet + 280 additional feet which equals 380 feet in toto? Beverly |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
1st Responder Wireless Acquires TAC 9 Paging | Scanner | |||
Ohio/Penn DX Bulletin #719 | General | |||
FCC: Broadband Power Line Systems | Policy | |||
Extending range of wireless motion sensor | Antenna | |||
Extend range of wireless motion sensor | Antenna |