Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 4th 03, 08:34 PM
reliccastiron
 
Posts: n/a
Default Kaito WRX-911 quality control issues?


"Kevin Croxen" wrote in message
u...
Anybody else had a quality control problem with those new Kaito WRX-911
models?


First one question: Do the words "Made in China" appear anywhere
on this radio? If the product does have those '3 words' imprinted
anyplace on it, then quality control is out the window. The purpose of
Chinese electronics factories is to mass produce consumer goods
for the lowest cost on the planet. As a result, and as the old sage
goes: "You get exactly what you pay for". Remember when the
words "Made in Japan" and "Made in Hong Kong" was a subliminal
warning that the product so marked was of shoddy and/or cheap
manufacturer? This is what "Made in China" represents today.

Perhaps in a few Years with the importation of better tooling
materials, procedures, facilities this will go away. For now I would
avoid ANYTHING that runs off of electricity and comes from the PRC.
Take a look for example at all the product recalls listed at www.cpsc.gov
You will see that 70% of the items listed for recall came from China.

This should tell everyone something. Check those labels folks before
you trade your money for "new-in-the-box-JUNK".

  #2   Report Post  
Old December 5th 03, 12:01 AM
tommyknocker
 
Posts: n/a
Default

reliccastiron wrote:


"Kevin Croxen" wrote in message
u...
Anybody else had a quality control problem with those new Kaito WRX-911
models?


First one question: Do the words "Made in China" appear anywhere
on this radio? If the product does have those '3 words' imprinted
anyplace on it, then quality control is out the window. The purpose of
Chinese electronics factories is to mass produce consumer goods
for the lowest cost on the planet. As a result, and as the old sage
goes: "You get exactly what you pay for". Remember when the
words "Made in Japan" and "Made in Hong Kong" was a subliminal
warning that the product so marked was of shoddy and/or cheap
manufacturer? This is what "Made in China" represents today.

Perhaps in a few Years with the importation of better tooling
materials, procedures, facilities this will go away. For now I would
avoid ANYTHING that runs off of electricity and comes from the PRC.
Take a look for example at all the product recalls listed at www.cpsc.gov
You will see that 70% of the items listed for recall came from China.

This should tell everyone something. Check those labels folks before
you trade your money for "new-in-the-box-JUNK".


Yes, Kaito is one of a number of Chinese companies that have entered the
SW radio market in the past year. If the quality control curve of the
Grundig Satellit 800 (aka Tecsun Ham 2000) is any indication, it'll take
a few years to iron out all the QC bugs.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Phase frequency Detector Deepthi Homebrew 48 June 3rd 04 12:01 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 04:01 PM
Antenna Rotor Control Burnt Up Chuck Boatanchors 0 December 7th 03 05:32 AM
Amateur Radio Legal Issues List Amateur Radio Station N0JAA Digital 2 July 19th 03 05:31 PM


All times are GMT +1. The time now is 06:31 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017