Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 25th 04, 06:16 AM
David Snyder Hale
 
Posts: n/a
Default I don't understand 'split'

I don't understand split operation. So, I tried googling for articles, and
found one at http://www.guam.net/pub/midxa/nl/nl_apr98.html

Here is an excerpt which emphasizes my confusion:

"When do you need to go to a split operation ? When the people you are
giving reports to are not answering, or when you are not getting your
report from the station you are working because of other stations who
are continuously calling. Simply, when the QRM starts slowing you
down. Split operation moves the QRM and you are no longer forced to
wait for 20 or 30 stations to stop calling you so you can work one of
them Modern transceivers today come equipped with two VFO's - some
even come with two receivers. The RIT (on Yaesu rigs, the CLARIFIER)
can also be used for split operations. The primary goal of a split
operation is to get the calling stations (the pileup) far enough away
from the DX station so that the pileup causes no interference on
frequency the DX station is transmitting on."

So, this seems to say that if you are getting so much QRM that you
can't hear the calling stations, you move them to a different
frequency.

OK, so you move them to a different frequency. How does that help
anything if they are at 14.12 instead of 14.10? They are still all
calling in the same place.

I guess I do see that you might be better heard, if you have a transmit
frequency and a listen frequency, no one is talking over your transmit
frequency so stations can hear you without QRM. But if you have a
listen frequency, that's where everyone will be and the DX station will
always have to deal with QRM.

Am I missing something?

73,

--
Dave * N3WTK (DM04xf) * http://isi.mtwilson.edu * n3wtk at arrl dot net
  #2   Report Post  
Old November 26th 04, 07:05 PM
J999w
 
Posts: n/a
Default


However, there is a viable alternative to ''running split''. That is
selecting the calling stations by number (in their callsigh), or areas of
the world, i.e. US Only, VE only, etc.


I HATE that because I always seem to tune in just as they've finished with the
9's !

jw
k9rzz
  #3   Report Post  
Old November 26th 04, 10:36 PM
Dan/W4NTI
 
Posts: n/a
Default


"J999w" wrote in message
...

However, there is a viable alternative to ''running split''. That is
selecting the calling stations by number (in their callsigh), or areas

of
the world, i.e. US Only, VE only, etc.


I HATE that because I always seem to tune in just as they've finished with

the
9's !

jw
k9rzz


Yep....it can indeed be frustrating.

I remember when I operated from the Marshal islands in the 80s. I was
really impressed with the Japanese amateurs. They were and are a very
disciplined group. Later on I found out why. They were using a simplex 2m
FM channel to cooridinate DX hunting. Kept down the doubles and talking
over folks really well.

Actually the most troublesome ops were the US hams. I found this to be true
when I operated in Europe also.

Just some thoughts.

Dan/W4NTI


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 12:30 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017