Remember Me?
Menu
Home
Search
Today's Posts
Home
Search
Today's Posts
RadioBanter
»
rec.radio.amateur
»
Homebrew
>
Anyone out there can help me with eprom programming?
LinkBack
Thread Tools
Search this Thread
Display Modes
Prev
Next
#
4
September 23rd 06, 11:59 PM posted to rec.radio.amateur.homebrew
Atlanta-ham
external usenet poster
First recorded activity by RadioBanter: Sep 2006
Posts: 2
Anyone out there can help me with eprom programming?
wrote:
On Sat, 23 Sep 2006 17:23:37 -0400, "xpyttl"
wrote:
Not too many folks fiddle with EPROMS anymore. Microcontrollers with
Error! There are plenty of people using eproms for systems and other
uses. I keep a programmer for such a reason.
onboard EEPROM are cheaper and easier to program, plus you get some logic
that allows you to reduce the circuit complexity thrown in for the ride. Of
course, these things grow ... with the logic, an encoder is cheaper and more
pleasant to use than the thumbwheel, but now you would like to add a display
.... and on and on. But still, I wouldn't be surprised if the micro,
encoder and display wasn't still cheaper than the EEPROM and BCD switch.
A micro like a PIC would likely be a lower cost solution and you can
then uses a cheaper switch and all. A programmer really more of a
cable for a PIC can be easily built for a PC parallel port.
Allison
..
"Atlanta-ham" wrote in message
roups.com...
Years ago in 73, and other mags, programming an eprom for the Icom 22S
was the rage.
I now have aquired a TransWorld transceiver that is programmed with
diodes. I wish to build a BCD thumbwheel input, with an Eprom for data
translation. It's no problem building a board, but it's a problem with
me programming the eprom. I don't need anything fancy, no memory, no
scanning, just using the thumbwheels to move frequency. I've never
programmed an eprom before.
I've looked around at PIC circuits, and understand I could program quite easily with my computer, however, I'm not that good at programming a PIC either! There's a control head that comes with this rig, that allows me to select twenty frequencies, along with power, squelch, and other things. I can probably get a board to use the PIC with, however, I know absolutely nothing about PIC programming! Last time I used BASIC was back in the early eighties! There as a project some time ago called the "Kendra Board" I believe in either 73, or CQ, using a PIC.
Reply With Quote
Thread Tools
Search this Thread
Show Printable Version
Search this Thread
:
Advanced Search
Display Modes
Switch to Linear Mode
Switch to Hybrid Mode
Threaded Mode
Posting Rules
Smilies
are
On
[IMG]
code is
On
HTML code is
Off
Trackbacks
are
On
Pingbacks
are
On
Refbacks
are
On
Similar Threads
Thread
Thread Starter
Forum
Replies
Last Post
FREE! "THE CB EPROM DATA BOOK" OF FREQ. MODS
Lou Franklin
CB
1
December 17th 03
11:14 AM
FREE! "THE CB EPROM DATA BOOK" OF FREQ. MODS
Lou Franklin
CB
0
November 14th 03
02:33 AM
FREE! "THE CB EPROM DATA BOOK" OF FREQ. MODS
Lou Franklin
CB
0
November 10th 03
08:26 PM
FREE! "THE CB EPROM DATA BOOK" OF FREQ. MODS
Lou Franklin
CB
0
October 28th 03
01:28 AM
FREE! "THE CB EPROM DATA BOOK" OF FREQ. MODS
Lou Franklin
CB
2
October 27th 03
02:53 AM
All times are GMT +1. The time now is
09:25 PM
.
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
Contact Us
RadioBanter forum home
Privacy Statement
Copyright © 2017
LinkBack
LinkBack URL
About LinkBacks