| Home |
| Search |
| Today's Posts |
|
#3
July 17th 08, 08:13 PM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
Measure Signal Generator with Oscilloscope?
() wrote in
: I know the scope is working because its 1K hz calibration signal looks fine. Well, you know that the path from the calibrator through the scope is OK, but probably nothing about the external inputs. The generator dial goes from 100 KC to 30 MC. Is this too high a frequency to be monitored with a 465? The 465's specs were DC to 100MHz. -- Bert Hyman | St. Paul, MN | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Threaded Mode
