| Home |
| Search |
| Today's Posts |
|
#4
September 17th 08, 01:04 AM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
Pro-46 scanner mods
On Sep 14, 6:52*pm, bprid wrote:
I have recently bought a pro-46 scanner on ebay with the hope of doing some modifications to it. *One of the modifications i wanted to do was to restore the cellular frequency to it. *I did tons of searching and found a few sites that had instructions on how to do it but they were in text and were kind of vague. *I got as far as figuring out which resistors to remove but the problem is i dont know where to solder it back onto. *I tried a few different locations that i thought were correct but had no sucess. I dont want to just keep trying different places in fear of ruining the scanner. *If anyone has any knowledge of this topic and could help i would greatly appreciate it. *I can also provide pictures of the board showing what i have taken off and am hoping that maybe someone could take the picture and actually show me exactly where the resistor needs to go. *Any help would be appreciated. Thanks -- bprid Give me an email address that works Jimmie |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| RadioShack Pro-84 Scanner Help - Many Scanner Radio Problems Can Be"Fixed" With A Better Scanner Antenna | Shortwave | |||
| Mods.DK | Shortwave | |||
| DSP, DRM and other Mods for the DX-394 | Digital | |||
| looking 4 scanner w/ Mods | Scanner | |||
| Pro-38 Scanner Mods | Scanner | |||
Threaded Mode
