| Home |
| Search |
| Today's Posts |
|
#7
July 11th 10, 07:35 PM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
direct conversion receiver Question
On Sun, 11 Jul 2010 10:50:58 -0500, "amdx" wrote:
In a direct conversion receiver, does the osc. run at exactly the same frequency as the received signal? Assuming the answer is yes; Is it possible to have a high Q LC front end at the output from the antenna, split the signal and feed one output to the rf input of the mixer and feed the other splitter output to an amplifier and use the amplified signal to drive the osc input of the mixer? Are you trying to reinvent the regenerative receiver ? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Direct Conversion Receiver with NPN transistors | Homebrew | |||
| IQ demod / IF or Direct conversion | Homebrew | |||
| Direct conversion + DSP receiver for S-measurements? | Homebrew | |||
| Direct conversion receivers for AM | Homebrew | |||
| Direct conversion receivers for AM | Homebrew | |||
Threaded Mode
