| Home |
| Search |
| Today's Posts |
|
#3
April 5th 13, 05:47 PM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
TO-3 transistor socket
On 28/03/13 13:20, JIMMIE wrote:
I want to add sockets TO-3 for the pass transistors in my 12 volt power supply. The trouble is I can not find current(I) specifications for the sockets. I really dont know what I should expect for a spec, guessing 10 amps for a good quality unit. Any help would be greatly appreciated. KD4RQE Jimmie Pass transistors need a heatsink ,so why should you need sockets. Connection with a PCB located circuit is usually done with ¨sliding solder tags¨ wired to the PCB , but of course you can also directly solder the wires to the transistor pins. Frank GM0CSZ / KN6WH |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| crystal socket | Boatanchors | |||
| 12 Pin Socket | Boatanchors | |||
| FA: SK 600A socket | Swap | |||
| Need relay and socket - TRC-447, 457, or 458 | CB | |||
| Grundig 17 transistor..transistor radio..has BC Band SW ...anyone know this radio? | Boatanchors | |||
![highlandham[_3_] is offline](https://www.radiobanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
