Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Joe McElvenney" wrote in message ... Hi, Mouser have some NEC pre-scalers (3GHz max) for $2.92 a throw. Any idea of the NEC part number ? Thanks |
#2
![]() |
|||
|
|||
![]()
Hi,
They are listed at - http://www.mouser.com/catalog/615/217.pdf and NEC have a data sheet on-line if you do a quick Google. I should point out that they are really only simple dividers with none of the front-end bits necessary to make a complete prescaler. I was thinking of using one with an old Racal 1991 VHF counter that has the built-in maths capability required to enable a non-decade pre-division. Cheers - Joe |
#3
![]() |
|||
|
|||
![]()
Hi,
They are listed at - http://www.mouser.com/catalog/615/217.pdf and NEC have a data sheet on-line if you do a quick Google. I should point out that they are really only simple dividers with none of the front-end bits necessary to make a complete prescaler. I was thinking of using one with an old Racal 1991 VHF counter that has the built-in maths capability required to enable a non-decade pre-division. Cheers - Joe |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
suggestions for a limited space HF antenna.. vertical or dipole | Antenna | |||
suggestions for a limited space HF antenna.. vertical or dipole | Antenna | |||
Good Moble HF Antenna - Suggestions / Comments? | Antenna | |||
Cell & VHF/UHF antenna suggestions for fiberglass RVAntenna | Antenna | |||
Antenna Suggestions | Boatanchors |