Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Steve Nosko wrote:
"Joe McElvenney" wrote in message ... Hi, OOPS! On a second reading I think that I misunderstood the posting and realise now that the device was meant to generate an annoying signal for a few minutes 'after' he had released the pressel. Were it close enough to the offending station, it would only need to be of quite low power and limited sensitivity so restricting it to the offending individual. That's what I got. To do this @ 455KHz would require lots of antenna or power. 1/2 mile is very long. I used to interfere with other kids transistor radios by tuning mine 455 away so that the LO in mine was on their Rx freq. weeeeoooeeee. Only works a few feet. A friend of mine was thinking of building a small transmitter that would put out on 262khz, 455khz (am) and 10.7mhz fm. It was to be a low power portable transmitter to be used mobile when he got cut off my some ***hole on the road. He could then curse the guy out over his radio (assuming he had the radio on). |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
2 antennas on 802.11 device? | Antenna | |||
help id this device. | Boatanchors | |||
Oregon Scientific temp/time device: Display UTC? | Equipment | |||
How do you use an LCC SMD device - holders or carriers or ?? | Homebrew | |||
How do you use an LCC SMD device - holders or carriers or ?? | Homebrew |