LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old October 30th 04, 02:02 PM
chafik CN8JV
 
Posts: n/a
Default

"xpyttl" wrote in message ...
Don't forget to check your supply. The 706 needs about 11 volts and if you
have the backlight turned on, it draws significant current in receive. In
my wife's car, on a cold day, I get this symptom if the engine isn't
running. If you measure less than 12 volts at the power plug, and/or if
your supply lines are a little light, I'd be suspicious of that.

..

"chafik CN8JV" wrote in message
...
My problem is that I have an Icom 706 MK-II, that won't power up.
When I push the power button I can hear a relay click in the radio,
and a thump in the speaker but that is it. I've checked the fuses
internal and external all are ok. Does anyone have any suggestions as
to a fix this problem.

Thanks in advance and 73's
CN8JV Chafik



The power supply is OK
I think I have connected the 8V output from the TRX to the Ground from
the PC sound Card!!!
any idea please?
What compounenets should I replce?
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ICOM PS-125 Power Supply Glitches? [email protected] Equipment 0 August 12th 04 11:24 PM
Icom IC-251A Low Power Mod? acepilot Homebrew 12 March 17th 04 01:54 AM
Icom IC-251A Low Power Mod? acepilot Homebrew 0 March 15th 04 02:22 AM
Derivation of the Reflection Coefficient? Dr. Slick Antenna 104 September 6th 03 02:27 AM


All times are GMT +1. The time now is 11:44 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017