Yes, the 47 V 8A series regulator supply is in the big cabinet. It also has
all of the protections for the MRF150 transistors. Also a fan for the 100W
amplifier module. The transmitter is completely self-contained.

There is no attempt at miniaturization. I don't have the time or patience
for that level of effort. Each radio is a "test bed" and not a finished
product. Just this morning I made two circuit improvements in the receiver.
I recently rebuilt the 3.395 MHz IF amp module and the AGC processor module
to get rid of a rat's nest of "fixups" and haywire. It looks pretty good
now.

I do admire the tremendous effort that goes into the compact transceivers,
but I don't want to duplicate it. It is the basic radio communications
functionality that I care about.

Bill W0IYH

"Harold E. Johnson" wrote in message
news:hNpIe.220263$_o.151253@attbi_s71...

"William E. Sabin" wrote in message
news:1GpIe.236642$xm3.51767@attbi_s21...
A picture and brief discussion of my homebrew HF receiver and transmitter
are on QRZ.COM.

Bill W0IYH

Very handsome Bill. Is that 40+ volt supply internal to the transmitter
cabinet? Any blowers involved?

Regards
W4ZCB