| Home |
| Search |
| Today's Posts |
|
#9
|
|||
|
|||
|
Jeff wrote:
Hi, Ive been trying to locate a suitable unity gain buffer amplifier IC that can drive a 50 load. Application is to buffer a VCO output at 5Mhz. Needs to be 8pin DIP and operate on a single-ended supply. I had found what I wanted in the CLC109, but cant seem to find a supplier. Any suggestions greatly appreciated regarding type and supplier that is user friendly to international countries. JEFF ZL3JK New Zealand An AD817 can deliver +-50 mA and has a gain bandwidth product of 50 MHz. http://www.analog.com/UploadedFiles/...66266ad817.pdf 4$ from Digikey. Good for either a gain 1 buffer or a gain 2 with series 50 ohm resistor, 50 ohm source. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| RS DX-394B: why 2nd LO buffer added? | Equipment | |||
| RS DX-394B: why 2nd LO buffer added? | Homebrew | |||
| RS DX-394B: why 2nd LO buffer added? | Shortwave | |||
| RS DX-394B: why 2nd LO buffer added? | Equipment | |||
| RS DX-394B: why 2nd LO buffer added? | Homebrew | |||