| Home |
| Search |
| Today's Posts |
|
|
|
#1
October 7th 05, 04:20 AM
|
|||
|
|||
Jim Thompson wrote:
On Thu, 6 Oct 2005 19:35:36 -0500, "Ron H" wrote: The 3M conductive adhesives like the 9703 work well. Not sure how they do it but it conducts in the Z axis ( thru the adhesive ) but not accross the surface direction ( X & Y axis ). It's a pressure sensitive transfer adhesive ( tape that you stick on then peel off the paper carrier leaving the adhesive behind) X-Y axis Insulation Resistance = 3.4 x 10 to the 14th Ohms/square Z axis Contact Resistance = 1.25 milliOhm-in2 Pretty neat stuff! Ron H. Sounds VERY interesting! I have some clients that need to mount components that can't stand the heat of soldering. The only problem might be "tenacity"... how much "shake, rattle and roll" can it take? Its glorifies scotch tape: http://multimedia.mmm.com/mws/mediaw...4spSxgrOkF W- |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| solder paste for SMT? | Homebrew | |||
| Warning -- bad new type of solder flux | Boatanchors | |||
| CHEAP SONY 2010 REPAIR | Shortwave | |||
| sn96.3 ag3.7 solder qstn | Boatanchors | |||
| Have You Been Harmed By Lead Solder? | Equipment | |||
Hybrid Mode
