I read in sci.electronics.design that wrote (in
.com) about 'epoxy
instead of solder?', on Thu, 6 Oct 2005:

Robert Baer wrote:

The silver conductive epoxy is extremely conductive, and even tho i
never measuresd the resistivity, i would wager that it is better than
copper if used properly.

Just another point of reference. From:
http://www.efunda.com/materials/solders/tin_lead.cfm
Eutectic tin lead solder has a conductivity of about 1.44*10^-5 ohm cm,
or 8.5 times that of copper.

resistivity, not conductivity.
--
Regards, John Woodgate, OOO - Own Opinions Only.
If everything has been designed, a god designed evolution by natural selection.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk

John Woodgate wrote:
I read in sci.electronics.design that wrote:


Just another point of reference. From:
http://www.efunda.com/materials/solders/tin_lead.cfm
Eutectic tin lead solder has a conductivity of about 1.44*10^-5 ohm cm,
or 8.5 times that of copper.

resistivity, not conductivity.

Thank you.