LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Old December 15th 05, 04:42 AM posted to rec.radio.amateur.homebrew
Highland Ham
 
Posts: n/a
Default To build or not to build

If everything works out this weekend I should have about 10w or so to
drive into a linear. My friend here in town thinks I should buy used
Dentron Clipperton or Heathkit. I don't think 10watts would do either
justice. If 10w would give me a KW out with a commercial unit I would
consider buying a good used unit.

=================
That's a 20dB amplification ...a bit much for a single stage amp.
You need a 10 dB intermediate stage ,resulting in 100 W output.
The final 10 dB to 1 kW can then be achieved with a (standard) Poweramp.

Frank KN6WH / GM0CSZ
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to build an amplifier chassis???? Curious George Homebrew 5 August 12th 05 10:00 AM
VHF Broadband balun 4 to 1 ratio..(50 and 144 mhz)..maybe even up to 440? how to build one? [email protected] Antenna 1 March 13th 04 05:09 AM
Ham Radio Deluxe v1.2b, build 308 available Igor von Uberwald Equipment 0 February 29th 04 07:33 PM
Ham Radio Deluxe v1.2b, build 308 available Igor von Uberwald Equipment 0 February 29th 04 07:33 PM
Want to build PC interface for YAESU 857 Pedro Antonio De Sousa Pedroso Equipment 0 November 19th 03 03:44 PM


All times are GMT +1. The time now is 08:49 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017