LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Old January 11th 06, 06:08 PM posted to rec.radio.amateur.homebrew,sci.electronics.design
RST Engineering
 
Posts: n/a
Default Zener Noise (was: 1N4007 varactors)

OK, then. A zener makes a poor noise source according to what I'm reading.
Noise.com used to sell off-spec diodes by the onesies for we poor peons to
play with, but for whatever reason that doesn't seem to be the case any
more.

Given that a zener (at whatever current) is a poor noise source, what is a
good source of electronic broadband noise from low HF through high UHF --
say, 5 to 500 MHz.? (No smart remarks about spark gaps.)

Jim



"Winfield Hill" wrote in message
...


We took
bench measurements, did calculations, found the scientific
literature (it was a subject that occupied physicists in the
late 50s, see posts 72-76), and we did plenty of speculation.



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electronic tuning (high voltage varactors) Joel Kolstad Homebrew 12 November 2nd 04 10:43 PM


All times are GMT +1. The time now is 06:39 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017