Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
japanese transistors are usually marked without the two first markings...
For instance a 2sb824 will be marked as b824. Fets are marked as 2sk or 3sk. Diodes as 1s..., it is like the american notation 1n, diode, 2n transistor etc.... "John Ferrell" schreef in bericht ... When dealing with Yaesu (Vertex) it is worth the effort to contact Vertex for special parts. There is a special regulator in the power supply for the FT-301 that is no longer available. Contacting Vertex led to a replacement subassembly for about $6. Not bad support for a 25 year old piece of equipment. On Tue, 31 Jan 2006 23:56:11 -0600, Kerry Miller wrote: Since I'm going to have to order a chip for that Astron PS I was working on, I dug out another old PS that died a few years back. If I have to pay shipping, I might as well order enough parts to at least make up for the shipping costs... Does any of you guys know where to find a schematic for a Yaesu FP-757HD power supply? It has a 3-terminal regulator in it, it looks like a 317, but it has funky markings on it which say B824, then down and to the right it says Q5D. It might be an O or 0 (zero) 5D. Do you guys know if you can replace this B824 thing with an LM317? The transistors are oddballs too but I haven't gotten the number for them. If I have to, I can just start from scratch on it, there's not much to it and there were a couple of caps with the legs corroded off. I can probably just come up with my own regulator as easy as I can fix this one unless I can find a schematic. Do you guys know where to find a schematic for this thing? Tnx, Kerry, WD5ABC John Ferrell W8CCW |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
R8B and external power supply | Shortwave | |||
What does a bad power supply filter sound like? | Boatanchors | |||
Wanted: Power Supply for TR-4C | Equipment | |||
Wanted: Power Supply for TR-4C | Equipment | |||
Wanted: Power Supply for TR-4C | Equipment |