Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
"Kerry Miller" wrote in message
news:84YDf.148864$WH.136453@dukeread01... Since I'm going to have to order a chip for that Astron PS I was working on, I dug out another old PS that died a few years back. If I have to pay shipping, I might as well order enough parts to at least make up for the shipping costs... Does any of you guys know where to find a schematic for a Yaesu FP-757HD power supply? It has a 3-terminal regulator in it, it looks like a 317, but it has funky markings on it which say B824, then down and to the right it says Q5D. It might be an O or 0 (zero) 5D. Do you guys know if you can replace this B824 thing with an LM317? The transistors are oddballs too but I haven't gotten the number for them. If I have to, I can just start from scratch on it, there's not much to it and there were a couple of caps with the legs corroded off. I can probably just come up with my own regulator as easy as I can fix this one unless I can find a schematic. Do you guys know where to find a schematic for this thing? Tnx, Kerry, WD5ABC Here we go: 3 - Pass (NPN) transistors Q1 - Q3: 2SD717-Y on heat sink These 3 should be on PC board (AVR Unit PB-2156 Q101 - 2SK192-BL (looks like FET) Q102 - 2SA1012Y (looks like PNP bipolar) Q103 - 2SA950Y (looks like PNP bipolar) Q102 drives the pass transistors Q103 Base connected to VR101 for adjustment (voltage adjust?) w9gb |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
R8B and external power supply | Shortwave | |||
What does a bad power supply filter sound like? | Boatanchors | |||
Wanted: Power Supply for TR-4C | Equipment | |||
Wanted: Power Supply for TR-4C | Equipment | |||
Wanted: Power Supply for TR-4C | Equipment |