Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]() Mike Coslo wrote: Hey all, I'm having an situation with my Keyer/Key setup. Every once in a while, I'll get a double when I shouldn't. It's usually on the dit side. The key is a home-brew Iambic. The radio is an IC-745. THe contacts have been cleaned, to no avail. Anyone have a similar situation or know if this may have been an issue with the 745? I'm going to try a few experiments, but any help is appreciated. - Mike KB3EIA - Mike, that only goes to show that you just can't rely on that new-fangled stuff. What if Paul Revere were waiting for the signal, "One if by land, Two if by sea," and you sent him a double instead of a single. American history would have been changed. Stick to manually formed dits and dahs. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Morse Code: One Wonders... and Begins to Think ! [ -- --- .-. ... . / -.-. --- -.. . ] | Shortwave | |||
Response to "21st Century" Part One (Code Test) | Policy | |||
Low reenlistment rate | Policy | |||
Some comments on the NCVEC petition | Policy | |||
NCVEC NPRM for elimination of horse and buggy morse code requirement. | Policy |