Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
Most of the CW ops I know prefer the Iambic keys.
I just spent many hours on a Navy straight key so kept with what felt comfortable. -- Caveat Lector "Mike Coslo" wrote in message ... Caveat Lector wrote: I have that problem occaisionally with a bencher single paddle key and increasing the spacing between the points and adding a little more spring tension solves the problem. I'll try that. There is an adjustment spring, but perhaps it is a little weak and should be replaced. I like the contact spacing paper thin, but when it is too thin -- may cause a double bounce. Yes Bencher does make a single paddle key -- looks like the Iambic with two paddles -- but functions as a single paddle key. That sort of key sounds logical to me. Although I'm starting to "get" the Iambic, it still seems a little strange. I should probable see if I et a little better before switching again. Thanks, Mike KB3EIA - |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Morse Code: One Wonders... and Begins to Think ! [ -- --- .-. ... . / -.-. --- -.. . ] | Shortwave | |||
Response to "21st Century" Part One (Code Test) | Policy | |||
Low reenlistment rate | Policy | |||
Some comments on the NCVEC petition | Policy | |||
NCVEC NPRM for elimination of horse and buggy morse code requirement. | Policy |