Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
----- Original Message -----
From: "Brian Hill" Newsgroups: alt.binaries.pictures.radio Sent: Sunday, January 27, 2008 1:52 AM Subject: marantz 250 amp early 70s "Buck Frobisher" wrote in message ... "Brian Hill" wrote in message ... Here it is almost done. -- Regards B.H. Hill Amplification http://hillamplification.com Brian's Radio Universe http://webpages.charter.net/brianhill/500.htm wow, looks like lots of work, despite the fairly open look of the various boards. You had to completely take one out? Yea I had to go over it all. The main failure was that a number of carbon comp resistors went south in the HV circuits and the voltage went way up frying a few transistors etc... So I replaced all the carbon comps and most of the capacitors minus the mica types which all tested good. The circuit boards are all very robust being about 3/16" thick with heavy trace. It's a nice well designed amp. I rebuilt the power supply relay too and hope it works? I give it the smoke test tomarrow! BH Good luck! that should last you for another 30-40 years... |
#2
![]() |
|||
|
|||
![]() "Buck Frobisher" wrote in message Good luck! that should last you for another 30-40 years... I hope so Buck. BH |
#3
![]() |
|||
|
|||
![]() "Buck Frobisher" wrote in message Good luck! that should last you for another 30-40 years... I hope so Buck. BH |
#4
![]() |
|||
|
|||
![]() "Buck Frobisher" wrote in message Good luck! that should last you for another 30-40 years... I hope so Buck. BH |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|