| Home |
| Search |
| Today's Posts |
|
#4
January 20th 09, 08:08 PM
posted to alt.binaries.pictures.radio
|
|||
|
|||
My first recone attempt
"Ken" wrote in message ... Brenda Ann wrote: I got Sooooooooooooooo lucky.. this is from a Philco 38-34 or some such.. the old cone was completely gone, but the spider and voice coil were intact. As I didn't want to try to remove the spider or voice coil (they were well centered and still attached to one another), I instead cut two slits in the cone and slid it over the spider, then centered the cone and glued the spider to it. Once that had set, I trimmed the surround to fit and glued that to the frame. It turned out pretty good, and sounds pretty good, too. I will have to add some short spacers to the mounting bolts, to keep the foam surround from touching the cabinet, as it sticks out about 1/8" beyond the frame. No big deal, though, and now I have the speaker to match the chassis.  Where did you get the cone? Ken http://www.electronix.com:80/catalog...keywords=11-75 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| First Attempt | Antenna | |||
| Hams attempt to destroy GMRS! | Policy | |||
| Hams attempt to destroy GMRS! | Policy | |||
| World record attempt | Broadcasting | |||
| Broadcasting World Record attempt | Broadcasting | |||
Threaded Mode
